Tools

Weld Mount 2.25" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10

2.25" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. ...

Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 50

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...

Weld Mount 2" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10

2" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels,...

Sea-Dog Canvas Snap Tool

Canvas Snap Tool Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps. WARNING: This product...

Weld Mount 1.75" Tall Stainless Stud w/1/4" x 20 Thread - Qty. 10

1.75" Tall Stainless Stud with 1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging...

Weld Mount Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 Quantity

Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 QuantityStuds with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that require a smaller stud diameter. These studs can be...

Sea-Dog Emergency Deck Fill Plug

Emergency Deck Fill PlugNitrile-Buna RubberThis Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant...

Sea-Dog Motor Flush Ear Muff

Motor Flush Ear Muff Outboard motor flushers quickly flush away salt, sand, minerals and contaminates from your lower unit cooling system extending the engine’s service life. Easy to use molded PVC cups deliver fresh water to flush the cooling...

Ancor 6" Diagonal Cutting Pliers - 1000V

6" Diagonal Cutting Pliers - 1000VFeatures:Insulated to 1000VErgonomic cutter for wire or cable tiesChrome VanadiumLength: 6" (15.2 cm) Manufacturer : Ancor Manufacturer Part No : 710040 UPC : 091887992168

Weld Mount Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75 Tall - 6-Pack

Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-PackUnlike the SOB standoffs which have a blind thread, the SOT series standoffshave a thread which runs all the way through the barrel of the standoff.This allows the standoff to be...

Weld Mount Mixing Tips f/Use w/AT-6030,AT-2010, & AT-4020

Adhesive Mixing Tip For AT-6030Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips...

Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15

1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of...