Tools

Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 3/8" OD - Requires 1" Stud - Qty. 25

Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.375" Stud Required:...

Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 100

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...

Weld Mount .75" Tall Stainless Standoff Through Thread w/#10 x 24 Threads - Qty. 6

.75" Tall Stainless Standoff w/#10 x 24 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted...

Ancor Flag Terminal Die Set 12-10

Flag Terminal Die Set 12-10Features:Works with all Ancor ratcheting crimpers; 703010, 703015, 703030, 703035 Manufacturer : Ancor Manufacturer Part No : 703042 UPC : 091887991659

Weld Mount 1.5" Tall Stainless Steel Stud w/#10 x 24 Threads - Qty. 10

1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. ...

Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 1" OD - Requires 1.75" Stud - Qty. 25

Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 1.0" Stud Required:...

Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 5/8" OD - Requires 1.5" Stud - Qty. 25

Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.625" Stud Required:...

Weld Mount AT-850 Square Mixing Tip f/AT-8040 - 4" - Case of 50

AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features:Square Mixing Tip4"...

Weld Mount 3" White Round Poly Insulation Washer - 50-Pack

3" White Round Poly Insulation Washer - 50-PackWeld Mount's 3" White Round Polypropylene Insulation Washer Manufacturer : Weld Mount Manufacturer Part No : 102450

Weld Mount Executive Adhesive & Fastener Kit w/AT-8040 Adhesive

Executive Adhesive & Fastener Kit w/AT-8040 AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder...

GROCO Thru-Hull Installation Tool

Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer.  Slide the thru-hull fitting, flanged end first, over the tool.  (It...

Weld Mount AT-113B Large Black Footman's Strap - Qty. 6

Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...