Rigging

C. Sherman Johnson Splice Eye w/Threaded Stud: 5/16" -24 x 2-1/2" LH w/Splice Eye

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life...

C. Sherman Johnson Over Center Snap Gate Hook f/1/8" Wire

Over Center Snap Gate Hook for 1/8" WireThe over center design has no load on the swinging hook when closed. This feature allows easy opening, yet stays secure with a heavy split ring on the plunger latching devise. Investment Cast T-316 Stainless...

C. Sherman Johnson Short Adjuster f/1/8" Wire

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-406

C. Sherman Johnson "T" Style Toggle Jaw f/3/16" Wire

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-415

Ronstan Channel Style Stay Adjuster - 6-7/8" (174mm) Long

Channel Style Stay Adjuster - 6-7/8" (174mm) LongApplications:Typically used on dinghies, catamarans and small keelboatsMaterials:Grade 316 Stainless SteelSpecifications:Pin Ø: 1/4"Increment Length: 1/2"Qty. Adjustment Settings:...

C. Sherman Johnson Lever Arm Crimper Tool

Lever Arm Crimper ToolC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which...

C. Sherman Johnson Single Threaded Gate Eye f/3/16" Wire

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-407

C. Sherman Johnson Double Threaded Interlocking Gate Eye f/3/16" Wire

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-408

Schaefer T-Track Stainless Steel Slider 1" x 1/8" Lined

T-Track Stainless Steel Slider 1" x 1/8" LinedSpecifications:Track Size 1" x 1/8" (25 mm x 3 mm)Max. Boat Length-  27 feet (8 m)Max. Boat Weight- 5000 lbs (2270 kg)Max. Sail Area- 315 sq. ft (29 m2)Length- 3" (76 mm)Width- 1-3/8" (35 mm)Height-...

C. Sherman Johnson Splice Eye w/Threaded Stud 5/16" -24 x 2-1/2" RH w/Splice Eye

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life...

C. Sherman Johnson Pulpit Anchor f/1" Rail

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminated jaw fittings for lower or upper life lines. (1/2" hole). Hole will not accept cast gate hooks.  Manufacturer : C. Sherman Johnson Manufacturer Part No...

C. Sherman Johnson Toggle Jaw w/Splice Eye

Toggle Jaw with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight...